How To Flash Tecno Spark 3 Stock Rom Firmware

How To Flash Tecno Spark 3 Stock Rom Firmware

Things You Need

• Charge your device: Before you proceed with the below information, you are recommended to ensure that your Tecno Spark 3 is at least 50% charged.
• PC or Laptop: To carry out this Stock Rom Firmware installation, you need a PC or Laptop.
• Take Device Backup: The very first thing you need to do is make a backup.
• Smart Phone Flash Tool Download
• Install the Latest Driver: TECNO SPARK 3 USB Drivers
• Download: Download the above-required files on your PC.

How To Flash Tecno Spark 3 Stock Rom Firmware

Follow this procedure below if you wish to flash Tecno Spark 3 Stock Rom. 

• Download the Stock Firmware on your personal computer.
• Install the USB MTK Drivers (skip if you have it already installed).
• Download and Launch the Smart Phone Flash Tool (SP Flash Tool)
• Click the Scatter-loading button to navigate to the stock Rom you just downloaded.
• Select the Scatter File from the extracted Stock Firmware on your computer.
• Select the Download Only in the SP flash tool option
• Click the Download button to start the Formatting process.
• Connect your device via USB to the computer>> holding volume + and volume – button of your device at the same time or holding power button only so that the flashing process will starting working
• Patiently wait for your device to be formatted.
• After the formatting is done, a Big Green button will pop up on the SP Flash to show that.
• Unplug your device and boot it up.
• If you have a boot loop after booting your device, boot into recovery mode and do a factory reset.
• You are all good.

Warning

We will not be held responsible if any damage happens to your device.